Night Siblings - WeatheredThe "Night Siblings" are a DIY kit consisting of two different saber hilts: the Regional Manager (single) and the Redemption Gen4 from Lux Sabers. Both models can be connected with a coupler to form a double saber.The DIY kit is inspired by the double sword wielded by a long-lost and presumed dead student of the Dark Side of the Force in the finale of the animated adventures of our favorite space saga. It’s produced by from high quality materials to give you an authentic feel for this fearsome weapon of this dark warrior: polished and anodized aluminum, brass, plastic and rubber.Since the original weapon of this tattooed villain was split in two and damaged during the fight in the first prequel, a repair was necessary. The damaged half was repaired with the hilt of another force user to create a saber staff. Therefore the design of the two halves of the double sword is asymmetrical.A coupler enables the double sword to be divided into two halves and both used separately. The Regional Manager half can be equipped with an illuminated crystal pommel to replicate this earlier damaged version. The Redemption features a pommel that allows you to recreate the original design of the hilt before it was modified into a double sword. The connector has some hidden sound venting, same goes for the main body. It is adjustable so that details like buttons always align correctly when you connect both halves to a saber staff. The scale of the Night Sibilings is 1:1 and its details have been carefully recreated. The overall length is 570mm while the outer diameter is just 33,6mm. Its weight is 560g as a staff. Since the hilt is to be weathered, please add a lead time of approximately 5-6 weeks. The hilt is able to accept a 7/8-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of:Collectors BoxCertificate of AuthenticitySaber hilts (Regional Manager - Single, Redemption Gen4 - Single) - weathered by the Astoria Workshop  The Regional Manager breaks down into 40 pieces:Emitter, display (polished aluminum)Emitter, fx (polished aluminum)Emitter Fins (polished aluminum, 10 Pieces)Main Body, A (polished aluminum)Coupler (polished aluminum, 2 Pieces)O-Rings (rubber, 2 Pieces)Crystal Pommel, (aluminum)Crystal Pommel, base PT1 (molded black plastic)Crystal Pommel, base PT2 (molded red translucent plastic)Crystal Pommel, crystal (molded red translucent plastic)Crystal Pommel, rods (brass, 2 Pieces)LED Bezels (polished aluminum, 2 Pieces)5mm Accent LEDs (2 Pieces)Customs Bolts (stainless steel, 2 Pieces)Red Thumbscrew (red anodized aluminum, 2 Pieces)Silver Thumbscrew (stainless steel, 2 Pieces)Silver Thumbscrew Rounded (stainless steel, 2 Pieces)Silver Washer (polished aluminum, 4 Pieces)Covertec Wheel (black anodized aluminum)The Redemption Gen4 breaks down into 10 pieces:Shroud (polished aluminum)Main Body (black anodized aluminum)Grip (black anodized aluminum)Clamp (polished aluminum)Coupler (polished aluminum)Coupler Greeble (grey anodized aluminum, 2 Pieces)Covertec Wheel (black anodized aluminum)Pommel (polished aluminum)Sound vented Pommel (polished aluminum) This saber is made for display purpose and also allows dueling.All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.The DIY kit "Redemption" was designed and constructed by Lux Sabers. Watto's Junkyard was involved in the design and construction to release Night Siblings in a collaboration with Lux Sabers.

The Regional ManagerThe Regional Manager is inspired by the dark pupil who hunts down a force sensitive learner and his master during the first movie of the prequels to our most favorite space saga. He wields a menacing double-sided red bladed saber.It’s produced by a cnc mill from high quality materials to give you an authentic feel for this fearsome weapon of this dark warrior: polished and anodized aluminum, brass, plastic and rubber.Since his saber hilt was chopped in half the design allows to split the hilt into two halves and add a molded crystal pommel to achieve a battle damaged look. You can build this variant without modifying or damaging the saber since a connector piece was used in order to have the unique saber staff. The connector has some hidden sound venting, same goes for the main body. It is adjustable so that details like buttons always align correctly when you connect both halves to a saber staff. The scale of the Regional Manager is 1:1 and its details have been carefully recreated. The overall length is 530mm while the outer diameter is just 33,6mm. Its weight is 650g as a staff and 325g as a single hilt. The hilt is able to accept a 7/8-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of:Collectors BoxCertificate of AuthenticitySaber hiltThe staff breaks down into 77 pieces:Emitter, display (polished aluminum, 2 Pieces)Emitter, fx (polished aluminum, 2 Pieces)Emitter Fins (polished aluminum, 20 Pieces)Main Body, A (polished aluminum)Main Body, B (polished aluminum)Coupler (polished aluminum)O-Rings (rubber, 5 Pieces)Crystal Pommel (aluminum, 2 Pieces)Crystal Pommel, base PT1 (molded black plastic, 2 Pieces)Crystal Pommel, base PT2 (molded red translucent plastic, 2 Pieces)Crystal Pommel, crystal (molded red translucent plastic, 2 Pieces)Crystal Pommel, rods (brass, 4 Pieces)LED Bezels (polished aluminum, 4 Pieces)5mm Accent LEDs (4 Pieces)Customs Bolts (stainless steel, 4 Pieces)Red Thumbscrew (red anodized aluminum, 4 Pieces)Silver Thumbscrew (stainless steel, 4 Pieces)Silver Thumbscrew Rounded (stainless steel, 4 Pieces)Silver Washer (polished aluminum, 8 Pieces)Covertec Wheel (black anodized aluminum)This saber is made for display purpose and also allows dueling.All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

The Regional Manager Single Hilt - WeatheredThe Regional Manager is inspired by the dark pupil who hunts down a force sensitive learner and his master during the first movie of the prequels to our most favorite space saga. He wields a menacing double-sided red bladed saber.It’s produced by a cnc mill from high quality materials to give you an authentic feel for this fearsome weapon of this dark warrior: polished and anodized aluminum, brass, plastic and rubber.Since his saber hilt was chopped in half the design allows to split the hilt into two halves and add a molded crystal pommel to achieve a battle damaged look. You can build this variant without modifying or damaging the saber since a connector piece was used in order to have the unique saber staff. The connector has some hidden sound venting, same goes for the main body. It is adjustable so that details like buttons always align correctly when you connect both halves to a saber staff. The scale of the Regional Manager is 1:1 and its details have been carefully recreated. The overall length is 530mm while the outer diameter is just 33,6mm. Its weight is 650g as a staff and 325g as a single hilt. Since the hilt is to be weathered, please add a lead time of approximately 2-3 weeks.The hilt is able to accept a 7/8-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of a half saber staff - no coupler, which includes the following parts:Collectors BoxCertificate of AuthenticitySaber hilt (half, no staff kit - no coupler) weathered by the Astoria WorkshopThe kit breaks down into 40 pieces:Emitter, display (polished aluminum, 1 Piece)Emitter, fx (polished aluminum, 1 Piece)Emitter Fins (polished aluminum, 10 Pieces)Main Body, A (polished aluminum)O-Rings (rubber, 2 Pieces)Crystal Pommel (aluminum, 1 Piece)Crystal Pommel, base PT1 (molded black plastic, 1 Piece)Crystal Pommel, base PT2 (molded red translucent plastic, 1 Piece)Crystal Pommel, crystal (molded red translucent plastic, 1 Piece)Crystal Pommel, rods (brass, 2 Pieces)LED Bezels (polished aluminum, 2 Pieces)5mm Accent LEDs (2 Pieces)Customs Bolts (stainless steel, 2 Pieces)Red Thumbscrew (red anodized aluminum, 2 Pieces)Silver Thumbscrew (stainless steel, 2 Pieces)Silver Thumbscrew Rounded (stainless steel, 2 Pieces)Silver Washer (polished aluminum, 4 Pieces)Covertec Wheel (black anodized aluminum)This saber is made for display purpose and also allows dueling.All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

Sword of the Force The "Sword of the Force" DIY kit is inspired by the hilt a student of the force wielded in the expanded universe to fight against the remnants of the empire. She was the daughter of a well-known space smuggler and a famous princess. It’s made from high quality materials to give you an authentic feel for this saber hilt: polished and anodized aluminum. The scale of the “Sword of the Force” DIY kit is 1:1 and its details have been carefully recreated. The overall length is 294,5mm while the outer diameter is just 32mm. Its weight is 240g. The hilt is able to accept a 1-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of: Collectors BoxCertificate of AuthenticitySaber hilt The hilt breaks down into 15 pieces: Display Emitter (polished partly black anodized aluminum) FX-Emitter, 1in (polished partly black anodized aluminum)FX-Emitter, 7/8in (polished partly black anodized aluminum)Blade Adapter 7/8 - 1in (polished Aluminum)Main Body, Upper (polished partly black anodized aluminum)Main Body, Lower (polished partly black anodized aluminum)LED Beezle with translucent LEDs (polished aluminum, 4 Pieces)Card (Plastic)Switch Box (polished aluminium)Covertec Wheel (polished Aluminum)Pommel Ring (polished Aluminum)Sound Vented Pommel (polished Aluminum) This saber is made for display purpose and also allows dueling. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

Grand Inquisitor The "Grand Inquisitor" DIY-KIT is inspired by the hilt that a dark side villain wielded after the fall of the Republic to hunt down followers of the light side of the force. Although he was himself a follower of the light side, he became the leader of the inquisitors and now pursues his opponents across the galaxy. It’s made from high quality materials to give you an authentic feel for this saber hilt: polished and anodized aluminum. The scale of the “Grand Inquisitor” DIY kit is 1:1 and its details have been carefully recreated. The overall length is 410mm while the outer diameter is 39mm. Its weight is 1,6kg. The hilt is able to accept a 1-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of: Collectors BoxCertificate of AuthenticitySaber hilt   The hilt breaks down into 27 pieces:   Blade Plug, 1in (polished partly black anodized aluminum, 2 pcs)Shroud, (black anodized aluminum, 2 pcs)Emitter, (polished partly black anodized aluminum, 2 pcs)Coupler, (polished partly black anodized aluminum, 2 pcs)Coupler Sound Vented (polished partly black anodized aluminum, 2 pcs)Main Body, (black anodized aluminum)Claw, (polished partly black anodized aluminum, 4 pcs)Ring, half (polished partly black anodized aluminum, 2 pcs)Switch Frame, (polished aluminum)Switch Inlay, (black anodized aluminum, 2 pcs)Switch Bottom (black anodized aluminum)Switch Cap (red plastic, 2 pcs)Bargraph Frame, (polished aluminum)Bargraph, (working)Fake Bargraph big, (polished partly black anodized aluminum)Fake Bargraph small, (polished partly black anodized aluminum)   This saber is made for display purpose and also allows dueling. As in the TV series, the ring on the kit cannot be folded or rotated. The last picture shows an exemplary weathered product next to a "Desert Wanderer" from KR Sabers. The item is not sold weathered. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

The Lasermaster is not based on a certain design we know from a galaxy far far away. The design is highly customable with for example etching, leather wraps and other options. This saber is for all who want to cosplay their very own force sensitive character or have a proper saber duel. The hilt is made from high quality materials to give you the authentic feel of our favorite franchise: polished aluminum, copper and brass. Emitter can be aligned in various orientations. It comes with two different necks and multiple switch inserts in different colors, which can be lightened up. An optional covertec wheel is included but you need to drill and tap your own hole in order to mount it. The total length is 320mm. The outer diameter is just 33mm i.e. max. 35mm. The inner diameter is 28mm. Its weight is 350g. The hilt is able to accept a 1-inch blade and to house electronics. The emitter depth also allows to use a Neopixel pcb and an in-hilt led adapter module by ShtokCustomWorx to choose between pixel blade and regular blade. The hilt is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of: Collectors Box Saber hilt The hilt breaks down into 22 pieces: Shroud (polished aluminum) Emitter, upper (polished aluminum) Emitter, lower (polished aluminum) Emitter adapter (copper) Blade Plug (polished aluminum) Neck (polished aluminum) Neck (copper, brass, 2 Pieces) Main Body Extension (polished aluminum) Main Body (polished aluminum) Activation Box (polished aluminum) Switch inserts (clear, green, blue, red, 8 Pieces) Covertec Wheel (polished aluminum) Display Pommel (polished aluminum) Sound Vented Pommel (polished aluminum) First batch is a limited edition of 50 hilts. The kit comes without customization like leather wrapping etc. This saber is made for display purpose and dueling. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

Night SiblingsThe "Night Siblings" are a DIY kit consisting of two different saber hilts: the Regional Manager (single) and the Redemption Gen4 from Lux Sabers. Both models can be connected with a coupler to form a double saber.The DIY kit is inspired by the double sword wielded by a long-lost and presumed dead student of the Dark Side of the Force in the finale of the animated adventures of our favorite space saga. It’s produced by from high quality materials to give you an authentic feel for this fearsome weapon of this dark warrior: polished and anodized aluminum, brass, plastic and rubber.Since the original weapon of this tattooed villain was split in two and damaged during the fight in the first prequel, a repair was necessary. The damaged half was repaired with the hilt of another force user to create a saber staff. Therefore the design of the two halves of the double sword is asymmetrical.A coupler enables the double sword to be divided into two halves and both used separately. The Regional Manager half can be equipped with an illuminated crystal pommel to replicate this earlier damaged version. The Redemption features a pommel that allows you to recreate the original design of the hilt before it was modified into a double sword. The connector has some hidden sound venting, same goes for the main body. It is adjustable so that details like buttons always align correctly when you connect both halves to a saber staff. The scale of the Night Sibilings is 1:1 and its details have been carefully recreated. The overall length is 570mm while the outer diameter is just 33,6mm. Its weight is 560g as a staff. The hilt is able to accept a 7/8-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of:Collectors BoxCertificate of AuthenticitySaber hilts (Regional Manager - Single, Redemption Gen4 - Single)The Regional Manager breaks down into 40 pieces:Emitter, display (polished aluminum)Emitter, fx (polished aluminum)Emitter Fins (polished aluminum, 10 Pieces)Main Body, A (polished aluminum)Coupler (polished aluminum, 2 Pieces)O-Rings (rubber, 2 Pieces)Crystal Pommel, (aluminum)Crystal Pommel, base PT1 (molded black plastic)Crystal Pommel, base PT2 (molded red translucent plastic)Crystal Pommel, crystal (molded red translucent plastic)Crystal Pommel, rods (brass, 2 Pieces)LED Bezels (polished aluminum, 2 Pieces)5mm Accent LEDs (2 Pieces)Customs Bolts (stainless steel, 2 Pieces)Red Thumbscrew (red anodized aluminum, 2 Pieces)Silver Thumbscrew (stainless steel, 2 Pieces)Silver Thumbscrew Rounded (stainless steel, 2 Pieces)Silver Washer (polished aluminum, 4 Pieces)Covertec Wheel (black anodized aluminum)The Redemption Gen4 breaks down into 10 pieces:Shroud (polished aluminum)Main Body (black anodized aluminum)Grip (black anodized aluminum)Clamp (polished aluminum)Coupler (polished aluminum)Coupler Greeble (grey anodized aluminum, 2 Pieces)Covertec Wheel (black anodized aluminum)Pommel (polished aluminum)Sound vented Pommel (polished aluminum) This saber is made for display purpose and also allows dueling.All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.The DIY kit "Redemption" was designed and constructed by Lux Sabers. Watto's Junkyard was involved in the design and construction to release Night Siblings in a collaboration with Lux Sabers.

Night Siblings - WeatheredThe "Night Siblings" are a DIY kit consisting of two different saber hilts: the Regional Manager (single) and the Redemption Gen4 from Lux Sabers. Both models can be connected with a coupler to form a double saber.The DIY kit is inspired by the double sword wielded by a long-lost and presumed dead student of the Dark Side of the Force in the finale of the animated adventures of our favorite space saga. It’s produced by from high quality materials to give you an authentic feel for this fearsome weapon of this dark warrior: polished and anodized aluminum, brass, plastic and rubber.Since the original weapon of this tattooed villain was split in two and damaged during the fight in the first prequel, a repair was necessary. The damaged half was repaired with the hilt of another force user to create a saber staff. Therefore the design of the two halves of the double sword is asymmetrical.A coupler enables the double sword to be divided into two halves and both used separately. The Regional Manager half can be equipped with an illuminated crystal pommel to replicate this earlier damaged version. The Redemption features a pommel that allows you to recreate the original design of the hilt before it was modified into a double sword. The connector has some hidden sound venting, same goes for the main body. It is adjustable so that details like buttons always align correctly when you connect both halves to a saber staff. The scale of the Night Sibilings is 1:1 and its details have been carefully recreated. The overall length is 570mm while the outer diameter is just 33,6mm. Its weight is 560g as a staff. Since the hilt is to be weathered, please add a lead time of approximately 5-6 weeks. The hilt is able to accept a 7/8-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of:Collectors BoxCertificate of AuthenticitySaber hilts (Regional Manager - Single, Redemption Gen4 - Single) - weathered by the Astoria Workshop  The Regional Manager breaks down into 40 pieces:Emitter, display (polished aluminum)Emitter, fx (polished aluminum)Emitter Fins (polished aluminum, 10 Pieces)Main Body, A (polished aluminum)Coupler (polished aluminum, 2 Pieces)O-Rings (rubber, 2 Pieces)Crystal Pommel, (aluminum)Crystal Pommel, base PT1 (molded black plastic)Crystal Pommel, base PT2 (molded red translucent plastic)Crystal Pommel, crystal (molded red translucent plastic)Crystal Pommel, rods (brass, 2 Pieces)LED Bezels (polished aluminum, 2 Pieces)5mm Accent LEDs (2 Pieces)Customs Bolts (stainless steel, 2 Pieces)Red Thumbscrew (red anodized aluminum, 2 Pieces)Silver Thumbscrew (stainless steel, 2 Pieces)Silver Thumbscrew Rounded (stainless steel, 2 Pieces)Silver Washer (polished aluminum, 4 Pieces)Covertec Wheel (black anodized aluminum)The Redemption Gen4 breaks down into 10 pieces:Shroud (polished aluminum)Main Body (black anodized aluminum)Grip (black anodized aluminum)Clamp (polished aluminum)Coupler (polished aluminum)Coupler Greeble (grey anodized aluminum, 2 Pieces)Covertec Wheel (black anodized aluminum)Pommel (polished aluminum)Sound vented Pommel (polished aluminum) This saber is made for display purpose and also allows dueling.All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.The DIY kit "Redemption" was designed and constructed by Lux Sabers. Watto's Junkyard was involved in the design and construction to release Night Siblings in a collaboration with Lux Sabers.