The "JK" DIY kit is inspired by the sword the son of a well-known space smuggler and a famous princess, as well as former student of the light side of the force used after his fall to the dark side. He led the relentless hunt against the resistance on behalf of the new order in the sequels of the most famous space saga. The weapon with the menacing red blade is based on an early concept of the first sequel. It’s made from high quality materials to get as close as possible to a realistic weapon from a galaxy far, far away: anodized aluminum, polished brass and copper. The scale of the “JK” DIY kit is 1:1 and it is a detailed replica with exposed crystal chamber. The overall length is 275mm while the outer diameter is 37mm. Its weight is 230g. The hilt is able to accept a 1-inch blade and to house electronics. Electronics are not included. The saber was exclusively designed for the Sale at Phoenix Props. The DIY kit consists of: Saber hilt The hilt breaks down into 51 pieces: Blade Plug, top (black anodized aluminum)Blade Plug, base (clear plastic)Emitter Greeble PT I (black anodized aluminum)Emitter Greeble PT II (black anodized aluminum)Main Body, Upper (black anodized aluminum)Main Body, Lower (black anodized aluminum)Crystal Chamber (polished aluminum, brass, copper, 19 Pieces)3D printed Crystals (translucent 3D print, 2 Pieces)Shroud (black anodized aluminum)Shroud Greeble PT I (black anodized aluminum)Shroud Greeble PT II (black anodized aluminum)Shroud Support (black anodized aluminum)Switch Greeble (black anodized aluminum)Switch Inserts (blue translucent rubber, 2 Pieces)Switch support (black anodized aluminum)Neck (black anodized aluminum)Lower Core (black i.e. red anodized aluminum, 3 Pieces)Crown (black anodized aluminum)Spine (black anodized aluminum)Pommel (black anodized aluminum)Wire Clips (black wire, 6 pieces)Red Wired (rubber) We highly recommend to use the replica for display purpose and not for dueling. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

The "JK" DIY kit is inspired by the sword the son of a well-known space smuggler and a famous princess, as well as former student of the light side of the force used after his fall to the dark side. He led the relentless hunt against the resistance on behalf of the new order in the sequels of the most famous space saga. The weapon with the menacing red blade is based on an early concept of the first sequel. It’s made from high quality materials to get as close as possible to a realistic weapon from a galaxy far, far away: anodized aluminum, polished brass and copper. The scale of the “JK” DIY kit is 1:1 and it is a detailed replica with exposed crystal chamber. The overall length is 275mm while the outer diameter is 37mm. Its weight is 230g. The hilt is able to accept a 1-inch blade and to house electronics. Electronics are not included. The saber was exclusively designed for the Sale at Phoenix Props. The DIY kit consists of: Saber hilt The hilt breaks down into 51 pieces: Blade Plug, top (black anodized aluminum)Blade Plug, base (clear plastic)Emitter Greeble PT I (black anodized aluminum)Emitter Greeble PT II (black anodized aluminum)Main Body, Upper (black anodized aluminum)Main Body, Lower (black anodized aluminum)Crystal Chamber (polished aluminum, brass, copper, 19 Pieces)3D printed Crystals (translucent 3D print, 2 Pieces)Shroud (black anodized aluminum)Shroud Greeble PT I (black anodized aluminum)Shroud Greeble PT II (black anodized aluminum)Shroud Support (black anodized aluminum)Switch Greeble (black anodized aluminum)Switch Inserts (blue translucent rubber, 2 Pieces)Switch support (black anodized aluminum)Neck (black anodized aluminum)Lower Core (black i.e. red anodized aluminum, 3 Pieces)Crown (black anodized aluminum)Spine (black anodized aluminum)Pommel (black anodized aluminum)Wire Clips (black wire, 6 pieces)Red Wired (rubber) We highly recommend to use the replica for display purpose and not for dueling. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

The Mr. Tyranus saber hilt kit is inspired by the curved weapon an elder apprentice of the dark side was using in the second and third prequel movie to our favorite space saga.Its distinctive curved and elegant design was addressing the advanced swordsmanship and wealth of its owner. The model kit is made of high quality materials to give you the most realistic experience of a weapon from a more civilized time: chrome plated and polished brass, anodized aluminum, steel, rubber and plastic.The scale of the Mr. Tyranus saber hilt kit is 1:1 and its details have been carefully recreated. For instance, there are two different “elbow” pieces – a sand blasted one and a chrome plated one - to resemble the different saber styles of this particular hilt seen in the two prequel movies.The overall length including the claw is 279mm – 252mm without the claw - while the outer diameter is just 31,5mm. Its weight is 900g. The hilt is able to accept a 7/8-inch blade and to house electronics.It is offered as a DIY FX kit. Electronics are not included.The DIY kit consists of: • Collectors Box • Certificate of Authenticity • Saber hilt The hilt breaks down into 27 pieces: • Claw (chrome plated brass) • Emitter (chrome plated brass) • Blade Plug (chrome plated brass) • Blade Holder (chrome plated brass) • Main Body (chrome plated brass) • Cage (steel) • Elbow (sand blasted steel, Gen1 and Gen2 deluxe edition) • Elbow (chrome plated steel, only Gen2) • Steel Panels (3 Pieces) • Top Rubber Grip  • Lower Rubber Grips (2 Pieces) • Elbow Rubber Grip  • Gold Button (Polished brass) • Red Button (Translucent red plastic) • Red Button Mount (aluminum) • Bolts (Polished brass, 3 Pieces) • Covertec Wheel (black anodized aluminum) • Pommel Greeble (chrome plated brass) • Pommel Cap (chrome plated brass) • Pommel Adapter (chrome plated brass) • Display Pommel (chrome plated brass)• Sound Vented Pommel (chrome plated brass) We highly recommend to use the replica for display purpose and not for dueling. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

The Nightbrother hilt kit resembles the saber of a dark pupil living on a rural and remote planet with his clan before he was chosen by a cult of force witches to serve the dark side of the force. We know him from the animated adventures of our favorite space opera. The horned and “tattooed” warrior is the “brother” to another famous dark side adept seen in the first prequel movie. His cruel and brutal way of fighting influenced the plain but menacing design of his clawed saber staff. Since he was a massive warrior, his weapon needs to address his frightening size. The DIY kit is produced from high quality materials to give you the proper feeling of using a real weapon: polished and anodized aluminum and rubber. In order maintain accuracy switches and sound venting are hidden. The Design does not allow the staff to be split in half. It can be disassembled at the emitter. A special mechanism guarantees details like claws and buttons are always aligned correctly.  The scale of the Nightbrother is 1:1 and its details have been carefully recreated. The overall length is 700mm, including claws and 585mm, without claws while the outer diameter is 44mm. Its weight is 710g.The hilt is able to accept a 1-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of: Collectors BoxCertificate of AuthenticitySaber hilt The staff breaks down into 39 pieces: Blade Plug (polished aluminum, 2 Pieces)Claw (polished aluminum, 2 Pieces)Emitter (polished aluminum, 2 Pieces)Emitter Ring (polished aluminum, 2 Pieces)Emitter Connector (polished aluminum, 2 Pieces)Emitter Greebles (polished aluminum, 4 Pieces)D-Ring Holder (polished aluminum, 2 Pieces)D-Ring (polished steel, 2 Pieces)LED Beezel (polished aluminum, 2 Pieces)5mm Accent LEDs (2 Pieces)Red Thumbscrew (2 Pieces)Silver Thumbscrew (2 Pieces)Thumbscrew Nuts (4 Pieces)Main Body (polished aluminum)Rubber Grips (8 Pieces)   We highly recommend to use the replica for display purpose and not for dueling. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

The Pariah was the very first DIY kit Watto’s Junkyard GbR designed and produced. It’s completely milled by a cnc machine – not cast. The Pariah resembles the elegant, curved saber a well-known abandoned female force learner used after her fall to the dark side to hunt her enemies down with her distinctive red blade in the animated adventures of our favorite space saga. A pair of Pariahs can be connected to an s-curved saber staff by a special coupler. The DIY kit is made of high quality materials to give you an authentic feel for a weapon as elegant as fearsome from a galaxy far, far away: anodized, painted and polished aluminum. The scale of the Pariah saber hilt kit is 1:1 and its details have been carefully recreated. Since the first release of this model kit multiple changes have been made to the original design to achieve the most accurate look by avoiding visible screws or seam lines and of course visible switches. The overall length is 240mm while the outer diameter is just 31mm. Its weight is 300g. The hilt is able to accept a 7/8-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The sabers are sold individually and as a pair. The DIY kit consists of: Collectors Box (upcoming generations)Certificate of Authenticity (upcoming generations)Saber hilt The hilt breaks down into 18 pieces: Emitter (painted and polished Aluminum)Emitter Fins (polished Aluminum, 5 Pieces)Blade Plug (polished Aluminum)Red Button (red anodized Aluminum)Red Button Rod (polished Aluminum)Upper Main Body (painted and polished Aluminum)Lower Main Body (painted and polished Aluminum)Side Bars (polished Aluminum, 2 Pieces)Bolts (polished Aluminum, 2 Pieces)Display Pommel (polished Aluminum)Sound Vented Pommel (polished Aluminum)Sound Vented Coupler (polished Aluminum, only sold with a pair) We highly recommend to use the replica for display purpose and not for dueling. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.

The Tusken Slayer is inspired by the saber a famous force sensitive learner wielded in the second episode of our most favorite space opera. It’s made from high quality materials to give you an authentic feel for this elegant weapon of a more civilized time: chrome plated and anodized aluminum, brass and rubber. The scale of the Tusken Slayer is 1:1 and its details have been carefully recreated. The overall length is 255mm while the outer diameter is just 32mm. Its weight is 320g. The hilt is able to accept a 1-inch blade and to house electronics. It is offered as a DIY FX kit. Electronics are not included. The DIY kit consists of: Collectors BoxCertificate of AuthenticitySaber hilt The hilt breaks down into 30 pieces: Shroud (chrome plated aluminum) Golden Thumbscrew (Brass)Silver Thumbscrew (chrome plated aluminum)Shroud Greeble with Silver Bolt (black anodized i.e., chrome plated aluminumBlade Plug (chrome plated aluminum)Main Body (chrome plated aluminum)Custom LED Beezels with Green and Red Accent LEDs (chrome plated aluminum, 4 Pieces)Clamp Band (Black anodized aluminum)Activation Box (chrome plated i.e., black anodized aluminum, 3 Pieces)5mm Accent LEDs (6 Pieces)Rubber Grips (6 Pieces)Covertec Wheel (black anodized aluminum)Display Pommel (chrome plated aluminum)Sound Vented Pommel (chrome plated aluminum) We highly recommend to use the replica for display purpose and not for dueling. All sales of DIY kits at the website of Watto’s Junkyard will be handled only by Watto’s Junkyard GbR personally. No other party is involved in designing, sales, quality control and shipping, if not explicitly named.